ProCurve Series 2300 and 2500 Switches Release Notes

191
Enhancements in Release F.02.02
CDP
Figure 89. Example of a CDP Configuration Listing
Viewing the Current Contents of the Switch’s CDP Neighbors Table
This command lists the neighboring CDP devices the switch has detected. Devices are listed by the
port on which they were detected. The entry for a specific device includes a subset of the information
collected from the device’s CDP packet. (For more on this topic, see “CDP Neighbor Data and MIB
Objects” on page 196.)
Syntax: show cdp neigbors
This example lists six CDP devices (four switches and two workstations) that the switch has detected
by receiving their CDP packets.
Figure 90. Example of CDP Neighbors Table Listing
CDP Enable/Disable on the Switch
Packet Hold Time in CDP Neighbor Table
Interval for Transmitting Outbound
CDP Packets on All Ports
Per-Port CDP Enable/Disable