ProCurve Series 2300 and 2500 Switches Release Notes

210
Enhancements in Release F.02.02
New Time Synchronization Protocol Options
Disabling the SNTP Mode. If you want to prevent SNTP from being used even if selected by timesync
(or the Menu interface’s
Time Sync Method parameter), configure the SNTP mode as disabled.
Syntax: no sntp Disables SNTP by changing the SNTP mode configuration to
Disabled.
For example, if the switch is running SNTP in Unicast mode with an SNTP server at 10.28.227.141
and a server version of 3 (the default),
no sntp changes the SNTP configuration as shown below, and
disables time synchronization on the switch.
Figure 103. Example of Disabling Time Synchronization by Disabling the SNTP Mode
TimeP: Viewing, Selecting, and Configuring
Timep Features
Feature Default Menu CLI Web
view the Timep time synchronization configuration n/a page 211 page 213 —
select Timep as the time syncronization method TIMEP page 210 pages 214
ff.
—
disable time synchronization timep page 212 page 216 —
enable the Timep mode Disabled —
DHCP — page 212 page 214 —
manual — page 212 page 215 —
none/disabled — page 212 page 217 —
change the SNTP poll interval 720 minutes page 213 page 216 —
Even though the Time Sync Mode is set to Sntp,
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.