ProCurve Switches 2524, 2512, and 4108gl Command Line Interface Reference Guide

----

3.3 Password Menu

HP ProCurve Switch xxxxx 01-Apr-2000

==========================- CONSOLE - MANAGER MODE -============================

Set Password Menu

1. Set Operator Password

2. Set Manager Password

3. Delete Password Protection

4. Return to Previous Menu...

0. Return to Main Menu...

Prompts you to enter an Operator-level password.

To select menu item, press item number, or highlight item and press <Enter>.

3.4 Event Log

HP ProCurve Switch xxxxx 01-Apr-2000

==========================- CONSOLE - MANAGER MODE -============================

M 01/01/90 00:00:07 sys: 'System reboot due to Power Failure'

I 01/01/90 00:00:07 system: --------------------------------------------------

I 01/01/90 00:00:07 system: System went down without saving crash information

I 01/01/90 00:00:29 timep: timep client enabled

I 01/01/90 00:00:29 garp: GARP Protocol enabled

I 01/01/90 00:00:31 tftp: Enable succeeded

I 01/01/90 00:00:31 system: System Booted.

I 01/01/90 00:00:37 ports: port 1 is now on-line

I 01/01/90 00:00:37 ip: network enabled on 10.0.8.105

I 01/01/90 00:39:55 mgr: SME CONSOLE Session - MANAGER Mode established

Log events stored in memory 1-13. Log events on screen 1-13.

Actions-> Back Next page Prev page End Help

Return to previous screen.

Use up/down arrow scroll log one line, left/right arrow keys to

change action selection, and <Enter> to execute action.