PS TEXT EDIT and PS TEXT FORMAT User's Guide

Using the SETPROFILE Command to Set Tab Stops

Creating an Oversized Table

5–30 058060 Tandem Computers Incorporated

4. Continue to work your way down the list until you have copied

“BUDGET,” “ACTUAL,” and the horizontal rule into position for each

department. The file should look like the next example (only part of the

file is shown). When you get to the bottom of the screen, you can either

press NEXT PAGE to scroll the text up, or you can press the ROLL UP key

to scroll the text up one line at a time. Or, you can press

SHIFT and ROLL UP to scroll the screen up eight lines at a time.

Note You can adjust the number of lines SHIFT ROLL UP and SHIFT ROLL DOWN scroll the

text by changing the repeat count number on the RECONFIGURE FUNCTION-KEYS

screen.

Administration

(Yuen)

BUDGET

ACTUAL

----------------------------------------------------------------------------

Design and layout

(Medici)

BUDGET

ACTUAL

----------------------------------------------------------------------------

Editing

(McAdams)

BUDGET

ACTUAL

----------------------------------------------------------------------------

inance

(Riveira)

Vertical Rules. It is easy to use the REPLACE command to insert vertical

rules into the table you have set up. You can use the REPLACE response

lines to type the command. Because you will probably use vertical rules

regularly when you create tables, however, you may want to assign the

command to a function key in your TABLE profile so you always have it

available. Both methods are shown here.