PS TEXT EDIT Reference Manual

RENUMBER
TEDIT Commands
058059 Tandem Computers Incorporated 3–153
In the “by:” field, supply the increment (default is 1). For the increment,
choose the default (1) or any number from 0.001 up to 99,999.999 minus
the number of lines in the file. The increment can contain three decimal
places.
In the “audit:” field, set audit to Yes or No (default is Yes). See “What
Happens” for more information about audit.
Move from one response line to the next with the cursor arrow keys.
What Happens
If you turned audit ON (YES), TEDIT remembers the line numbers so you
can reverse the renumbering with UNDO.
If you turned audit OFF (NO), TEDIT displays this warning message on the
status line after RENUMBER completes:
Can't use UNDO to reverse the renumbering
If you turn audit OFF (NO) and the renumbering fails, you can lose
information from the file.
You cannot use the UNDO command to reverse the renumbering of the file
or reverse any changes that you made before the renumbering.
Tips
After you enter the RENUMBER command and see the response lines,
you can press the HELP key once to see a short help text and twice to
see the complete help text.
Related Commands
SHOWNUMBER ON displays the line numbers.