PS TEXT EDIT Reference Manual

Unexpected Terminal Behavior with TEDIT
TEDIT and Tandem Terminals
058059 Tandem Computers Incorporated A–5
Versions B through C00: The response to the BREAK key, when used to
interrupt a SEARCH or REPLACE operation, takes about one minute.
The cursor is frozen in one spot when you:
View one page of a file two pages long.
Press the RECONFIGURE OPTIONS key.
Press EXIT to leave RECONFIGURE OPTIONS before you make
any changes.
Press the NEXTPAGE key.
Press RECONFIGURE OPTIONS again.
Versions B through D01: If you press CTRL A (hold down CTRL and
type A) while using TEDIT and then press any function key, the
terminal will not function. Press RESET to correct the terminal. This
may also happen with other control codes.
6530-WP Terminal
Anomalies
The 6530-WP terminal may exhibit the following anomaly with TEDIT,
depending on the version of firmware in the terminal.
Version A00: The cursor does not move from the top to the bottom of a
two-window display, with the cursor keys. You can move the cursor
with the local TAB and BACKTAB key.
6540 Terminal Anomalies The 6540 emulation of the 6530 terminal may exhibit the following anomaly
with TEDIT, depending on the terminal’s firmware.
Version A00: The terminal malfunctions when asked for its microcode
version number (the two-digit field after the letter).