PTrace Reference Manual

PTrace Commands
PTrace Reference Manual—526393-001
3-27
SELECT Command
Considerations: SELECT Command
•
If no SELECT command is entered, the default is ALL.
•
If SELECT is specified with no mask or keywords, ALL is assumed.
•
If CURRENT is specified, the previous selection mask is maintained and any new
settings are added. If CURRENT is not specified, the previous selection mask is
discarded and a new one is built.
•
Not all selection mask options are available for every subsystem. The options that
have meaning for each subsystem are specified in Appendix A, Subsystem-
Specific Information.
•
The RESET and FROM commands reset the mask to ALL.
•
Ptrace Select key in the ENV command display shows the selected enumerated
values from the SELECT command. If you specified the trace file (through the
FROM command) and the subsystem used to create the trace file uses keywords,
Valid Keywords for Subsystem OSN
MEM SYSMSG DSM MSG SM PROV ASN1
Valid Keywords for Subsystem QIO
QIODRIV QIOMEM QIOMOD QIOMSG QIOQUEValid Keywords for
Subsystem SCP
SPI MODULE
Valid Keywords for Subsystem SCS
LOGIC CLIENTREQ CLIENTREPLY SERVERREQ SERVERREPLY
Valid Keywords for Subsystem SX1
ASM BM CS CSFSM XSFSM SMFSM LM HS SS XM ASMBIU
PCPIU APNSOXFSM APNCRTFSM APNITIFSM APNLV5FSM LMGRFSM
APNLV5BIU
Valid Keywords for Subsystem TCI
SOCKCR MBUF IPC TCP UDPI UDPDI UDPO UDPDO IPI IPO
ROUTE SOCKCMD UDPUREQ
Valid Keywords for Subsystem TNT
ALLOC CONN CREATE OPEN NEWPROC RECV TELOPT SETMODE
SOCK TTY RCB
Valid Keywords for Subsystem TRC
QUEUES TIMERS PROCEDURES CHECKPOINTS SENDS REQUESTS
BREAK OPENCLOSE
Valid Mask Keywords
CLBI CLBO CLIPCTLI CLIPCTLO CLIPDI CLIPDO CLIPL1
CLIPL2 CLIPL3 CLIPL4 CLIPREQ DI DO DR IOS L0 L1
L2 L3 L4 L5 L6 L7 ALL DEFAULT CLIP