PTrace Reference Manual

PTrace Commands

PTrace Reference Manual—526393-001

3-31

TEXT Command

The TEXT command controls the textual display of trace records, excluding the header

record.

The textual display appears below labeled data, the HEX display, and the OCTAL

display, if they are present. The display consists of ASCII characters, with control

codes represented by 2-character or 3-character mnemonics. The exact format of the

display depends on the subsystem for which PTrace is displaying records. Some

subsystems do not support textual display of trace records.

enables the textual display of trace records.

OFF

disables the textual display of trace records. This is the default.

Table 3-4 lists the characters that appear in textual display.

TEXT [ ON ]

[ OFF ]

Table 3-4. TEXT Display Characters (page 1 of 2)

ASCII

Code

Displayed

Character

ASCII

Code

Displayed

Character

ASCII

Code

Displayed

Character

0 NUL 43 + 86 V

1SOH 44, 87W

2STX 45- 88X

3ETX 46. 89Y

4EOT 47/ 90Z

5ENQ 480 9[

6ACK 491 92\

7BEL 502 93]

8BS 513 94^

9HT 524 95_

10 LF 53 5 96 `

11 VT 54 6 97 a

12 FF 55 7 98 b

13 CR 56 8 99 c

14 SO 57 9 100 d

15 SI 58 : 101 e