PTrace Reference Manual

Errors, Warnings, and Informational Messages
PTrace Reference Manual—526393-001
C-8
Nonfatal Errors
Cause. The translate table you entered in the SETTRANSLATE command was too
long.
Recommended Action. Check your input and reenter the command.
Cause. The state tables specified in the STATETABLES command were not read in
because the end-of-file was encountered while the header of the statetable file was
being read.
Recommended Action. Verify that the contents of the specified file are correct and
reenter the command.
Cause. The state tables specified in the STATETABLES command were not read in
because of insufficient memory.
Recommended Action. You need to seek additional help. Follow the standard
procedures at your site for contacting the appropriate support personnel.
Cause. The state tables specified in the STATETABLES command were not read in
because they were in an old format.
Recommended Action. Create a newer version of the state tables and reenter the
command.
Cause. PTrace cannot find the end of a parameter.
Recommended Action. Correct the syntax and reenter the command.
Cause. This message is self-explanatory.
Recommended Action. Refer to the HELP information for the command and reenter
the command.
Specified translate table exceeds 256 bytes.
State tables not read. Bad statetable file.
State tables not read. No more room in segment.
State tables not read. Old file format.
String unterminated.
Syntax invalid.