PTrace Reference Manual

Errors, Warnings, and Informational Messages
PTrace Reference Manual—526393-001
C-9
Nonfatal Errors
Cause. The TACL param PTRACE^PM^LOC has a system name specified.
Recommended Action. Exit PTrace. Reenter the TACL parameter without the
system name. Restart PTrace. Only $vol.subvol is accepted.
Cause. The blocksize specified in the trace file header is more than the maximum
value that PTrace allows.
Recommended Action. Recreate the trace file with an allowable block size and
reenter the command.
Cause. This trace file is unreadable. There may be a corrupt trace record.
Recommended Action. Retry the trace if possible. If this is not possible, or if the
problem persists, keep a copy of the trace file and follow the standard procedures at
your site for contacting the appropriate support personnel.
Cause. This trace file is unreadable. There may be a corrupt trace record.
Recommended Action. Retry the trace if possible. If this is not possible, or if the
problem persists, keep a copy of the trace file and follow the standard procedures at
your site for contacting the appropriate support personnel.
Cause. The trace record size in the trace file header is larger than the maximum that
PTrace allows. The trace records will be truncated.
Recommended Action. No action is required.
Cause. The offset parameter specified in the SETTRANSLATE command is out of
range.
System name specified, Param PTRACE^PM^LOC ignored.
Trace file error: Blocksize (n) exceeds maximum (m).
Trace file error: Seq # mismatch at offset n, Expected x,
Recvd y.
Trace file error: Size (s) of rec n at offset o out of range.
Trace entry size limit exceeds maximum record size n.
Translation entry offset is out of range (0-255).