QIO Configuration and Management Manual

QIO SCF Error Messages
QIO Configuration and Management Manual—424717-008
A-2
Operator Messages
Operator Messages
Operator messages are identified by number. You can use the SCF HELP command to
display the text of a message. For example, if the system displays:
00001 Object
you can enter the following command to display the text of the message:
-> HELP QIO 1
The following QIO operator messages are presented in numerical order.
00001 Object
yy-dd-mm hh:mm:ss
is the date and time that the event occurred.
monitor-name
is the name of the QIOMON process that generated the event message.
segment-name
is the name of the memory segment for which the QIOMON process generated this
event.
sequence-no
is the sequence number from the process handle. This number increments each
time the QIOMON process is started.
event-reason
describes the reason for the event. This field displays “internal failed” or “operator
initiated.”
previous-state
indicates the state that the QIOMON process was in before this event occurred.
yy-dd-mm hh:mm:ss monitor-name TANDEM.ZQIO.D30 000001 Object
available Segment - segment-name:sequence-no,
event number:1, reason:
event-reason, previous state: previous-state,
current state: current-state, user content: undefined