QIO Configuration and Management Manual

QIO SCF Error Messages
QIO Configuration and Management Manual—424717-008
A-3
00002 Object
current-state
indicates the state of the QIOMON process after the event occurred.
Cause. The system has initialized the QIO segment, and the MON object is ready.
The QIOMON process also generates this message when it receives a COUP STOP
command, and the QIOMON process finds active client processes using the shared
segment.
Effect. The symptom string “T8671 - QIOMON - Unable to Stop because of Active
Client Processes” is displayed if a COUP STOP command was received; otherwise, no
symptom string is displayed and no recovery action is necessary.
Recovery. If the symptom string is displayed, use the NAMES command to show
current APPLs, then stop them. Once no APPLs are displayed, the QIOMON process
accepts a COUP STOP command. You can use the COUP STOP! command to force
the QIOMON process to stop; however, the client processes will receive failure
messages from most of the QIO Library calls.
00002 Object
yy-dd-mm hh:mm:ss
is the date and time that the event occurred.
monitor
is the name of the QIOMON process that generated the event message.
segment-name
is the name of the memory segment for which the QIOMON process generated this
event.
sequence-no
is the sequence number from the process handle. This number increments each
time the QIOMON process is started.
cause-reason
describes the reason for the event. This field will display “internal failed” or
“operator initiated.”
yy-dd-mm hh:mm:ss monitor TANDEM.ZQIO.D30 000002 Object
unavailable Segment -
segment-name:sequence-no, event number:2,
cause:cause-reason,previous state:
previous-state,current state: current-state, user content:
undefined