QIO Configuration and Management Manual

Configuring the QIO Subsystem
QIO Configuration and Management Manual424717-008
2-7
Understanding the Configuration File
This command results in a display similar to the following example:
In this NonStop S-series server display, the maximum pool size (Max Pool Size) for
both processor 00 and processor 01 is less than 128 MB, so moving the QIO memory
to Kseg2 is possible.
The default pool size is 16 MB.
For more information on the memory pool, see Subsystem Architecture on page 1-3.
Understanding the Configuration File
Before you begin to take steps to resolve the memory problems, you need to
understand the configuration file.
You can change the specifications of the QIO memory segment by using a
configuration file. This section describes the configuration file and its attributes.
The configuration file is an EDIT file (file code 101). It contains attributes that define the
QIO environment. If no configuration file is configured, the default values of the
configuration attributes are used.
QIO Detailed Status SEGMENT \OSCAR.$ZM00
State.................. DEFINED
Segment State.......... STARTED
Segment Type........... FLAT_UA
Segment Size........... 536870912
MDs in Use............. 1265
Max MDs Used........... 1440
Last Fail Size......... 0
Current Pool Size...... 30406276 Initial Pool Size...... 16776992
Max Pool Size.......... 56620676
Min Pool Size.......... 16776992
Current Pool Alloc..... 5442176 Max Pool Alloc......... 48083968
Current Pool Frags..... 284 Max Pool Frags......... 286
QIO Detailed Status SEGMENT \OSCAR.$ZM01
State.................. DEFINED
Segment State.......... STARTED
Segment Type........... RESIDENT
Segment Size........... 100663296
MDs in Use............. 1249
Max MDs Used........... 1259
Last Fail Size......... 0
Current Pool Size...... 45086340 Initial Pool Size...... 16776992
Max Pool Size.......... 75495044
Min Pool Size.......... 16776992
Current Pool Alloc..... 5478400 Max Pool Alloc......... 46991360
Current Pool Frags..... 418 Max Pool Frags......... 418