QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-6
SCF Online Help
SYSTEM \newsys, where newsys is the name of the system that is to become the
default system.
If the command pertains to an object, it is followed immediately by the object type and
the object name. For example, the following command aborts a subnet named
$ZTC0.#SN1:
SCF> ABORT SUBNET $ZTC0.#SN1
The following command aborts a route named $ZTC0.#ROU1:
SCF> ABORT ROUTE $ZTC0.#ROU1
If additional information is required, the object name is followed by a comma and the
parameters required to further specify the action to be taken. For example, the
following command changes the value of the DELAYACKS attribute for a process:
SCF> ALTER PROCESS $ZTC0, DELAYACKS OFF
Detailed information about individual command format for the QIO subsystem is
described later in this section.
SCF Online Help
SCF provides online support when you use the HELP command described in the SCF
Reference Manual for G-Series RVUs. If the HELP command alone is entered, SCF
responds with a menu that guides you through the available help options. Select from
the options displayed in the menu for the information you need.
Using this menu-mode help facility, you can obtain general information about SCF
basic components, such as attribute specifications, character strings, commands, file
names, integers, and so on.
In addition to getting general SCF information, you can obtain information specific to
your particular subsystem.
To obtain information about the syntax of TCP/IP object types and the commands that
apply to them, you enter the following command:
SCF> HELP QIO
QIO Subsystem SCF Commands
The remainder of this section describes the SCF commands supported by the QIO
subsystem. Other commands that are generally supported by SCF, such as the
ASSUME and ENV commands, are not documented in this manual. The SCF
Reference Manual for G-Series RVUs provides general information about SCF
commands, and you should be familiar with that information before reading the QIO
subsystem-specific information provided here.
Note. The online help facility can be used interactively or with an obey file.