QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-12
Obtaining Configuration Information About a MON
Object
Obtaining Configuration Information About a MON Object
The INFO MON command returns the static configuration attribute values for a QIO
monitor process object.
The INFO MON command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file as described earlier in this section under Output Destinations on page 4-5.
MON monitor-name
indicates the QIO monitor process you want to obtain information about.
DETAIL
specifies that the display is to include additional detailed information about the
object.
The format of the display for the INFO MON command without the DETAIL option is:
Name
is the name of QIOMON process for which you are requesting information.
INFO [ / OUT file-spec / ] MON monitor-name [ , DETAIL ]
Value: The name of the MON object as defined by the Kernel subsystem on
NonStop S-series servers.
The possible values are:
$ZMnn, where nn are numeric digits 00 through 15 that designate the
processor in which the QIOMON process is running,
or the asterisk ($ZM*) to specify all configured MON objects.
For example, $ZM00 specifies the QIO monitor process running in
processor 0, and $ZM14 specifies the QIO monitor process running in
processor 14.
Default: None provided.
2-> info mon $zm00
QIO Info MON
Name Config FileName
$ZM00