QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-19
Obtaining Names Information About a SEGMENT Object
QUEUE queue-name
specifies the name of the QUEUE you want to obtain information about.
The format of the display for the NAMES QUEUE command is:
QUEUE
shows a list of the configured QUEUE objects.
Obtaining Names Information About a SEGMENT Object
The NAMES SEGMENT command has the following syntax:
Value: The QUEUE name is defined by the client process and must be
unique within the segment. The name can as long as 23 characters.
It is recommended that the name of the APPL that is creating the
queue be used as the prefix for the QUEUE name. For example,
$ZM02.#ZTC2.IN is the queue that belongs to the $ZM02.#ZTC2
client process under the $ZM02 QIOMON process.
Default: None provided.
6-> names queue $zm00
QIO Names QUEUE \MYSYS.
QUEUE
$ZM00.#FOXKAU.30165E80.$FOXKAU.#COMP_Q
$ZM00.#FOXKAU.30165E80.$FOXKAU.#WANR_Q
$ZM00.#IPCORE.301727C0.$IPCORE.#COMP_Q
$ZM00.#IPCORE.301727C0.$IPCORE.#WANR_Q
$ZM00.#IPCORE.30172FC0.EXPAND_UIP_COMPLQ_0031
$ZM00.#IPCORE.30172FC0.EXPAND_UIP_RCVQ_0031
$ZM00.#ZLM00.30165C00.E4SA0.0.MGMT.RXPENDQ
$ZM00.#ZLM00.30165C00.E4SA0.0.MGMT.TXHOLDQ
$ZM00.#ZLM00.30165C00.E4SA0.0.MGMT.TXPENDQ
$ZM00.#ZLM00.30165C00.E4SA0.1.MGMT.RXPENDQ
$ZM00.#ZLM00.30165C00.E4SA0.1.MGMT.TXHOLDQ
$ZM00.#ZLM00.30165C00.E4SA0.1.MGMT.TXPENDQ
$ZM00.#ZLM00.30165C00.LAN0.OUTPUT
$ZM00.#ZLM00.30165C00.LAN01.OUTPUT
$ZM00.#ZLM00.30165C00.LAN02.OUTPUT
$ZM00.#ZLM00.30165C00.LAN03.OUTPUT
$ZM00.#ZLM00.30165C00.LAN04.OUTPUT
$ZM00.#ZLM00.30165C00.LAN21.OUTPUT
$ZM00.#ZLM00.30165C00.LAN22.OUTPUT
$ZM00.#ZLM00.30165C00.LAN23.OUTPUT
$ZM00.#ZLM00.30165C00.LAN24.OUTPUT
$ZM00.#ZLM00.30165C00.LAN3.OUTPUT
$ZM00.#ZLM00.30165C00.LAN4.OUTPUT
$ZM00.#ZLM00.30165C00.LAN7.OUTPUT
$ZM00.#ZLM00.30165C00.LMON_BCAST_INPUT
$ZM00.#ZLM00.30165C00.ZLM00_DR_INPUT
$ZM00.#ZLM00.30165C00.ZLM00_INPUT
$ZM00.#ZTC0.300B5E80.$ZTC0.#QIOSOCK.CMD
$ZM00.#ZTC1.30006280.$ZTC1.#QIOSOCK.CMD
$ZM00.#ZTC2.3010DC40.$ZTC2.#QIOSOCK.CMD
$ZM00.#ZTC3.300060C0.$ZTC3.#QIOSOCK.CMD
NAMES [ / OUT file-spec / ] SEGMENT segment-name