QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-20
Obtaining Names Information About a SEGMENT Object
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file as described earlier in this section under “Output Destinations.”
SEGMENT segment-name
indicates the SEGMENT you want to obtain information about.
The format of the display for the NAMES SEGMENT command is:
SEGMENT
shows a list of the configured SEGMENT objects.
Value: The SEGMENT name is the same as the MON name.
The name of the MON object as defined by the Kernel subsystem
on NonStop S-series servers.
The possible values are:
$ZMnn, where nn are numeric digits 00 through 15 that designate
the processor in which the QIOMON process is running,
or the asterisk ($ZM*) to specify all configured MON objects.
For example, $ZM00 specifies the QIO monitor process running in
processor 0, and $ZM14 specifies the QIO monitor process running
in processor 14.
Default: None provided.
7-> names segment $zm00
QIO Names SEGMENT \MYSYS.
SEGMENT
$ZM00