QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-21
STATUS Command
STATUS Command
Use the STATUS command to display current status and configuration information
about an object.
This is a nonsensitive command.
The STATUS command is supported for the following QIO subsystem objects:

APPL

MON

QUEUE

SEGMENT
Obtaining Status Information About an APPL Object
Use the STATUS APPL command to display current status and configuration
information about an APPL object.
The STATUS APPL command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file as described earlier in this section under “Output Destinations.”
APPL appl-name
specifies the client process.
DETAIL
specifies that the display is to include additional detailed information about the
object.
Considerations

The summary state of the object does not prevent the STATUS command from
being successfully completed.

The STATUS command does not alter the summary state of the object.
Note. The display examples are preceded by the command syntax that generated the display.
STATUS [ / OUT file spec / ] APPL appl-name [ , DETAIL ]