QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-31
Obtaining Status Information About a QUEUE Object
State
indicates the current summary state of the MON object. DEFINED is the only valid
value.
Segment State
is the current state of the QIO segment. Valid values are STARTING, STOPPING,
and DEFINED.
Segment Type
is the type of the shared memory segment. Valid values are KSEG2 (for segments
in Kseg2) and FLAT_UA (for segments in the flat memory space).
Segment Size
is the size, in bytes, of the QIO segment in the QIO subsystem. The segment size
is computed from the information in the configuration file.
MDs in Use
is the number of message descriptors (MDs) currently in use. Each message in the
QIO subsystem is represented by an MD.
Max MDs Used
is the highest number of message descriptors (MDs) ever in use in the QIO
subsystem.
Last Fail Size
is the buffer size requested on the last failure.
Current Pool Size
is the current size (in bytes) of the shared memory pool.
Initial Pool Size
is the size of the shared memory pool, in bytes, configured in the QIO subsystem.
The initial pool size is specified in the QIO configuration file (the default value is
4 MB Max Pool Size
is the high water mark, in bytes, that the shared memory pool has reached.
Min Pool Size
is the low water mark, in bytes, that the shared memory pool has reached.
Current Pool Alloc
is the number of bytes currently allocated from the shared memory pool.