QIO Configuration and Management Manual

QIO Subsystem SCF Commands
QIO Configuration and Management Manual—424717-008
4-32
STOP Command
Max Pool Alloc
is the high water mark, in bytes, allocated from the shared memory pool.
Current Pool Frags
is the current number of fragments in the shared memory pool.
Max Pool Frags
is the high water mark of fragments contained in the shared memory pool.
STOP Command
Use the STOP command to terminate the activity of objects in a normal manner. The
STOP command prevents the object from accepting further service requests. Upon
successful completion of the STOP command, the object is left in the STOPPED state
and is still configured in the QIO subsystem configuration database.
This is a sensitive command.
The STOP command is supported for the following QIO subsystem objects:

MON
Stopping a MON Object
Use the STOP MON command to shutdown the QIO subsystem.
The STOP MON command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file as described earlier in this section under Output Destinations on page 4-5.
STOP [ / OUT file-spec / ] MON monitor-name