RDF 1.3 IMPX README

ManualsBrandsHP ManualsServerHP NonStop G-Series

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: NonStop RDF/IMPX

Product ID: SA44V1, Update 3

Component Products: T0346A03 NonStop RDF/IMP

T0347D42 NonStop RDF/IMPX

T1226D46 NonStop LockStep Gateway

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need Adobe Acrobat Reader

(available on this CD) to read or print the IPSetup User Guide.

4. Decide whether you will use DSM/SCM to move files to Installation

Subvolumes (ISVs) after files are placed on the workstation. Using

DSM/SCM is optional, but is recommended when DSM/SCM is available.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. You are now ready to run the IPSetup program to move the NonStop

RDF/IMPX files to your DSV and ISV locations on your NonStop Tandem

server.

If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the IPSetup

User Guide section "Manual Software Placement Using the IPSetup

TACL Program" to place NonStop Kernel files manually.

Please follow the steps listed below.

a. Execute the IPSETUP.EXE program.

b. When prompted to select a target platform, make sure the

button has been selected for the NonStop Kernel RISC. Also,

if you wish to involve DSM/SCM in the installation, check the

appropriate box.

c. Enter a valid host name when prompted. You must also add a

user-name and password that already exists on the host system.

d. When prompted for a work subvolume, you can either use the

default or browse to a location of your choice.

Also, if you wish to retain the existing NonStop RDF/IMPX

Replication Software on your DSV and ISV, you are prompted for

a location to place that software.

file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.TXT

file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.TXT (1 of 4) [6/23/2004 11:39:29 AM]

Summary of content (4 pages)

PAGE 1
file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.TXT READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2001 Compaq Computer Corporation Product Name: NonStop RDF/IMPX Product ID: SA44V1, Update 3 Component Products: T0346A03 T0347D42 T1226D46 NonStop RDF/IMP NonStop RDF/IMPX NonStop LockStep Gateway I. Basic Product Installation Instructions 1. Ensure that requirements for using this product are met (see Section IV Product Requirements below). 2.
PAGE 2
file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.TXT e. Review the host file location of each file to be placed on your server. f. When you reach the Installation Manifest screen, you are given the DSV and ISV locations. g. You are now prompted to initiate the movement of the files to the target locations. Continue as prompted. h. When the installation has completed, click on FINISH. i.
PAGE 3
file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.TXT Communications controller allowing file transfer from PC to Tandem PC with 486 or higher processor and all of the following: CD-ROM drive VGA or higher-resolution video adapter and monitor Microsoft Mouse or similar pointing device Communications controller allowing file transfer from PC to Tandem Required Software: T9550D30 SOCKET LIBRARY or higher version T9552D30 TCP/IP FTP with IPM ABG or superseding IPM (for releases D31.
PAGE 4
file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.TXT internal links to each of the other sections of and is recommended as the starting point for viewing the manual with Adobe Acrobat Reader. 2. ACROBAT_VIEWERS subdirectory containing Adobe Acrobat Reader for DOS, OS/2, Windows, Windows NT, MacOS, Sun OS, Solaris, HP-UX, IBM AIX, and SGI IRIX. file:///C|/Documents and Settings/DEicher/Desktop/RDFIMPX 1.3 README.