RDF 1.4 IMP README

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: NonStop RDF/IMP

Product ID: SA43V1, Update 4

Component Products: T0346A04 NonStop RDF/IMP

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need Adobe Acrobat Reader

(available on this CD) to read or print the IPSetup User Guide.

4. Decide whether you will use DSM/SCM to move files to Installation

Subvolumes (ISVs) after files are placed on the workstation. Using

DSM/SCM is optional, but is recommended when DSM/SCM is available.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. Run IPSetup to place (move files from the CD to the workstation)

and install (move NonStop Kernel files to correct ISVs) this

product. If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the IPSetup

User Guide section "Manual Software Placement Using the IPSetup

TACL Program" to manually place NonStop Kernel files.

Please follow the steps listed below.

a. Execute the IPSETUP.EXE program.

b. When prompted to select a target platform, make sure the

button has been selected for the NonStop Kernel RISC. Also,

if you wish to involve DSM/SCM in the installation, check the

appropriate box.

c. Enter a valid host name when prompted. You must also add a

user-name and password that already exists on the host system.

d. When prompted for a work subvolume, you can either use the

default or browse to a location of your choice.

Also, if you wish to retain the existing NonStop RDF/IMP

Replication Software on your DSV and ISV, you are prompted for

a location to place that software.

e. Review the host file location of each file to be placed on

your server.

f. When you reach the Installation Manifest screen, you are given

file:///C|/Documents and Settings/DEicher/Desktop/RDF1^4ImpReadme.txt

file:///C|/Documents and Settings/DEicher/Desktop/RDF1^4ImpReadme.txt (1 of 3) [6/17/2004 1:10:09 PM]

PAGE 1
file:///C|/Documents and Settings/DEicher/Desktop/RDF1^4ImpReadme.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2003 HP Product Name: NonStop RDF/IMP Product ID: SA43V1, Update 4 Component Products: T0346A04 NonStop RDF/IMP I. Basic Product Installation Instructions 1. Ensure that requirements for using this product are met (see Section IV Product Requirements below). 2.
PAGE 2
file:///C|/Documents and Settings/DEicher/Desktop/RDF1^4ImpReadme.txt the DSV and ISV locations. g. You are now prompted to initiate the movement of the files to the target locations. Continue as prompted. h. When the installation has completed, click on FINISH. i. The installation process has moved the NonStop RDF/IMP softdoc to $SYSTEM.SOFTDOC. The softdoc is named T0346A04. j. Refer to the softdoc to complete the final steps of installation.
PAGE 3
file:///C|/Documents and Settings/DEicher/Desktop/RDF1^4ImpReadme.txt PC with 486 or higher processor and all of the following: CD-ROM drive VGA or higher-resolution video adapter and monitor Microsoft Mouse or similar pointing device Communications controller allowing file transfer from PC to NonStop RISC-based server Required Software: T9550D30 SOCKET LIBRARY or higher version T9552D30 TCP/IP FTP with IPM ABG or superseding IPM (for releases D31.00 to D40.