RDF System Management Manual

Operating and Monitoring RDF
HP NonStop RDF System Management Manual—524388-003
4-12
Requesting Online Help
Requesting Online Help
Through the RDFCOM HELP command, you can display brief descriptions of:
•
RDFCOM command syntax (including syntax for the HELP command itself)
•
Numbered RDF messages (such as 700, 705, and so forth)
The HELP texts are intended as reminders, not as substitutes for this manual.
Help for Command Syntax
To obtain syntax information for an individual command, enter HELP followed by the
command name. For example, to display the ADD command syntax, enter:
]HELP ADD
RDFCOM displays the following:
{ RDF }
{ MONITOR }
{ EXTRACTOR }
{ RECEIVER }
ADD { IMAGETRAIL $volume }
{ PURGER }
{ RDFNET }
{ NETWORK }
{ TRIGGER <trigger-type> }
{ VOLUME $volume }
{ $volume }
Cannot be performed with RDF running.
Only a user in the SUPER group can execute this command.
To obtain a list of the available RDFCOM commands, enter:
]HELP ALL
RDFCOM displays the following information:
Help is available for the following:
Configuration Commands:
ADD
ALTER { RDF | MONITOR | EXTRACTOR | RECEIVER | PURGER |
TRIGGER | RDFNET | VOLUME }
DELETE
INFO
INITIALIZE
RESET
SHOW
SET { RDF | MONITOR | EXTRACTOR | RECEIVER | IMAGETRAIL |
PURGER | NETWORK | RDFNET | TRIGGER | VOLUME }