RDF System Management Manual

Operating and Monitoring RDF
HP NonStop RDF System Management Manual—524388-003
4-16
Using RDFSCAN Commands
Using RDFSCAN Commands
To request an RDFSCAN function, you enter a corresponding RDFSCAN command,
selected from the list in Table 4-4. All of these commands are unrestricted; they can
be entered by any user.
The complete syntax for all RDFSCAN commands appears in Section 9, Entering
RDFSCAN Commands.
You can abbreviate the command name by entering only the first character (such as L
for List) or any number of the leading characters (such as DIS for Display). You can
use either uppercase or lowercase letters.
Table 4-4. RDFSCAN Commands
Command Object Function
AT [ record-number
]
Specifies the record number at which to begin the next
RDFSCAN function.
DISPLAY [ ON | OFF ] Enables or disables the display of record numbers for
the lines listed.
EXIT - - Terminates an RDFSCAN session.
FILE log-file Opens the specified file as the current EMS log.
HELP [ ALL ]
[ command ]
[ INTRO ]
Displays help text for commands and RDFSCAN
usage.
LIST number Beginning at the current record, examines subsequent
messages in the message file and displays those that
contain the current match pattern. The operation
terminates when the specified number of matches has
been found or the last record is encountered,
whichever happens first.
LOG log-file Copies any log messages subsequently displayed on
the screen by LIST commands to the specified file.
MATCH text Defines the current match pattern.
NOLOG - - Turns off the LOG command.
SCAN number Beginning at the current record, examines the specified
number of messages in the message file, and displays
messages that contain the current match pattern.