RDF System Management Manual

Entering RDFCOM Commands
HP NonStop RDF System Management Manual—524388-003
8-23
Command Overview
EXIT
The EXIT command ends your current RDFCOM session.
Where Issued
Primary or backup system.
Security Restrictions
None; anyone can enter the EXIT command.
RDF State Requirement
You can issue the EXIT command at any time, whether or not RDF has been started.
Usage Guidelines
If you issue the EXIT command in your current RDFCOM session, RDFCOM
terminates the session and returns control to the operating system.
If the EXIT command appears in a command file, RDFCOM stops reading the
command file and ignores any commands in the file that follow the EXIT command.
Furthermore, the following applies:
•
If the command file name was supplied in the IN option of the command that runs
RDFCOM, RDFCOM passes control to the operating system.
•
If the command file name was supplied in an OBEY command issued during an
interactive RDFCOM session, RDFCOM resumes control and prompts you for a
new command.
You can also end the current RDFCOM session by pressing the Control and Y keys at
the same time (Ctrl-Y), which is equivalent to issuing the EXIT command.
Example
When the EXIT command is issued in an interactive session, control of the terminal
returns to the operating system:
]EXIT
2>
EXIT