RDF System Management Manual

RDF Command Summary
HP NonStop RDF System Management Manual—524388-003
A-11
SET RECEIVER
The SET RECEIVER command sets the designated configuration parameters for the
receiver process to the supplied values within the RDF configuration memory table.
The supplied values are not applied to the RDF configuration file, however, until you
issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET TRIGGER
The SET TRIGGER command sets trigger parameters within the RDF configuration
memory table. The supplied values are not applied to the RDF configuration file,
however, until you issue an ADD TRIGGER command. The trigger type (REVERSE or
TAKEOVER) is specified in the ADD TRIGGER command.
Where Issued: Primary system; backup system when the primary is not available.
Security: Super-user group member.
SET RECEIVER receiver-option
where receiver-option is:
{ATINDEX atindex }
{CPUS primary-CPU : backup-CPU }
{EXTENTS (primary-extent-size,secondary-extent-size)}
{PRIORITY priority-number }
{PROCESS process-name }
{RDFVOLUME volume }
{SLOWMODE on-off value }
SET TRIGGER trigger-option
where trigger-option is:
{PROGRAM program-file }
{INFILE infile }
{OUTFILE outfile }
{CPUS primary-CPU : backup-CPU }
{PRIORITY priority }
{WAIT | NOWAIT }