RDF System Management Manual

RDF Command Summary
HP NonStop RDF System Management Manual—524388-003
A-12
SET VOLUME
The SET VOLUME command sets the designated configuration parameters for an
updater process to the supplied values within the RDF configuration memory table.
The supplied values are not applied to the RDF configuration file, however, until you
issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SHOW
The SHOW command displays the current parameter values contained in the RDF
configuration memory table for the specified process. With this command, you can
confirm the parameter values before issuing the ADD command that actually applies
them to the configuration file.
Where Issued: Primary or backup system.
Security: Any user.
SET VOLUME volume-option
where volume-option is:
{ATINDEX atindex }
{CPUS primary-CPU : backup-CPU }
{PRIORITY priority-number }
{PROCESS process-name }
{IMAGEVOLUME volume }
{UPDATEVOLUME volume }
{INCLUDE subvol.file }
{EXCLUDE subvol.file }
SHOW {RDF }
{MONITOR }
{EXTRACTOR }
{RECEIVER }
{IMAGETRAIL }
{TRIGGER }
{VOLUME }
{PURGER }
{RDFNET }
{NETWORK }