RDF System Management Manual

Additional Reference Information
HP NonStop RDF System Management Manual—524388-003
B-5
Sample Configuration File
| ***
| *** Set the receiver parameters.
| *** $REC is the name of the receiver process.
| ***
SET RECEIVER CPUS 1:2
SET RECEIVER EXTENTS (1000,1000)
SET RECEIVER PRIORITY 165
SET RECEIVER RDFVOLUME $GOLD
SET RECEIVER PROCESS $REC
| ***
| *** Add the receiver parameters to the
| *** RDF configuration file.
| ***
ADD RECEIVER
| ***
| *** Set the purger parameters.
| *** $PRG is the name of the purger process.
| ***
SET PURGER CPUS 3:2
SET PURGER PRIORITY 165
SET PURGER RETAINCOUNT 50
SET PURGER PROCESS $prg
| ***
| *** Add the purger parameters to the
| *** RDF configuration file.
| ***
ADD PURGER
| ***
| *** Add secondary image trails.
| ***
ADD IMAGETRAIL $SECIT1
ADD IMAGETRAIL $SECIT2
| ***
| *** Set the updater parameters for the first
| *** volume to be protected by the RDF product.
| *** $U01 is the name of this updater. Volume
| *** $DB1 on the backup node corresponds to the
| *** volume $DB01 on the primary node. This updater
| *** will use the secondary image trail SECIT1.
| ***
SET VOLUME CPUS 2:1
SET VOLUME PRIORITY 160
SET VOLUME UPDATEVOLUME $DB1
SET VOLUME IMAGEVOLUME $SECIT1
SET VOLUME PROCESS $U01
| ***
| *** Add the RDF updater parameters for
| *** the first updater process to the
| *** configuration file.
| ***
ADD VOLUME $DB01