RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-22
RDF Messages
754
Cause. The primary node processes have determined that the communications lines
have been restored. The extractor is now able to communicate with the receiver.
Effect. Processing continues from the point at which the network failed.
Recovery. This is an informational message; no recovery is required.
755
Cause. The primary process of a process pair stopped after creating its backup process,
but before completing the backup initialization.
Effect. This is a catastrophic error; the process abends, and RDF stops.
Recovery. If this message occurs for any process other than an updater, you will have to
resynchronize the primary and backup databases.
756
filename
is the name of a format 2 ENSCRIBE database file to which the encountered audit
record applies.
Cause. The extractor encountered an audit record associated with a format 2
ENSCRIBE database file.
Effect. The extractor skips the audit record and does not send it to the receiver.
Recovery. If your backup system is running a version of the operating system earlier
than D46, then no recovery is required. If your backup system is running the D46
operating system, then you must resynchronize your format 2 files when D46 is brought
back up on the primary system.
NETWORK RESTORED - Continuing Service
CHECKMONITOR FAILURE - Backup Abended
WARNING format 2 audit encountered for filename