RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-26
RDF Messages
770
Cause. The RDFNET process has successfully completed its initialization.
Effect. The process starts its task of performing synchronized transactions on each of
the primary nodes in the RDF network of RDF primary systems.
Recovery. This is an informational message; no recovery is required.
771
Cause. The receiver has successfully completed its initialization.
Effect. The receiver is prepared to receive data from the extractor.
Recovery. This is an informational message; no recovery is required.
772
Cause. The receiver determined that TMF is not started on the backup system.
Effect. The receiver abends.
Recovery. Start TMF on the backup system and then restart RDF.
773
vol -> vol
are the volume on the primary node that the updater is protecting and the
corresponding volume to which it is writing on the backup node.
Cause. The updater has successfully completed its initialization. The message includes
the audited volume name and its corresponding update volume name.
Effect. The updater is prepared to apply updates to the database on the backup node.
Recovery. This is an informational message; no recovery is required.
RDF RDFNET process started.
RDF Remote Receiver Started
TMF is not running on the REMOTE system
RDF Remote Updater Started vol -> vol