RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-27
RDF Messages
774
Cause. The extractor has successfully completed its initialization.
Effect. The extractor will begin reading TMF audit data and transmitting it to the
receiver.
Recovery. This is an informational message; no recovery is required.
775
sno
is the adjusted sequence number of the current audit trail file.
rba
is the adjusted relative byte address in the current audit trail file.
Cause. The extractor has encountered a restart condition during an online database
synchronization operation, and the current audit trail restart position sent by the receiver
may lead to loss of data.
Effect. The extractor revises its restart location to an earlier point in the audit trail
(
sno rba ), thereby guaranteeing that no data will be lost.
Recovery. This is an informational message; no recovery is required.
776
Cause. The receiver has terminated normal processing as the result of a STOP TMF,
STOP RDF, or TAKEOVER command.
Effect. Normal RDF shutdown processing continues.
Recovery. This is an informational message; no recovery is required.
RDF Local Extractor Started
Restart position adjusted for db synch sno rba
RDF Remote Receiver Shutdown Complete