RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-44
RDF Messages
835
command-text
is the text of the command that was issued.
Cause. The operator issued one of the following commands: ALTER, INITIALIZE
RDF, START RDF, START UPDATE, STOP RDF, STOP UPDATE, or TAKEOVER.
Effect. The RDF command is executed.
Recovery. This is an informational message; no recovery is required.
837
sno
is the sequence number of the image file in use at the updater restart.
rba
is the relative byte address in the image file where the updater restart occurred.
Cause. This informational message is logged by an updater when it begins a restart
operation.
Effect. The updater restarts and continues processing.
Recovery. Perform any corrective actions suggested by the preceding messages in the
RDF message log (actions such as reloading the appropriate CPU, or correcting the
underlying file error condition).
838
Cause. The RDFNET process has terminated unexpectedly.
Effect. The RDF system aborts.
Recovery. Determine why the RDFNET process stopped, and then restart the RDF
subsystem. If the problem persists, contact the Compaq Global Customer Support
Center (CGSC) or your service provider.
command-text
INFO - Restarting at image position sno rba
RDFNET process has terminated unexpectedly.