RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-51
RDF Messages
859
error#
is an error number.
Cause. The named RDF process has encountered the specified error while attempting to
begin a new transaction.
Effect. The process either restarts or abends, depending on the error.
Recovery. Consult the description of BEGINTRANSACTION errors in the Compaq
NonStop™ TM/MP Application Programmer’s Guide and take appropriate corrective
action, if necessary.
860
error#
is an error number.
Cause. The named RDF process has encountered the specified error while attempting to
begin a new transaction.
Effect. The process either abends and RDF aborts.
Recovery. Consult the description of BEGINTRANSACTION errors in the Compaq
NonStop™ TM/MP Application Programmer’s Guide and take appropriate corrective
action, if necessary.
861
Cause. The extractor has fallen behind the configured extractor RTD warning threshold.
Effect. The extractor continues normal processing.
Recovery. This is an informational message. You should, however, try to determine
why the extractor has fallen behind and take corrective action, if necessary.
862
Cause. The specified updater has fallen behind the configured updater RTD warning
threshold.
Error on BEGINTRANSACTION error#
Fatal error on BEGINTRANSACTION error#
Extractor RTD exceeds RTD warning value
Updater RTD exceeds RTD warning value