RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-52
RDF Messages
Effect. The updater continues normal processing.
Recovery. This is an informational message. You should, however, try to determine
why the updater has fallen behind and take corrective action, if necessary.
863
Cause. The RDF monitor process was unable to find the RDFNET configuration record
when performing a START RDF command.
Effect. The START operation fails and RDF shuts down.
Recovery. Restart RDF. If the record is still missing, you may have to reinitialize the
RDF product.
865
Cause. The purger configuration record is not in the RDF configuration file.
Effect. The reporting process abends and RDF aborts.
Recovery. Restart RDF. If the problem persists, contact your service provider.
866
Cause. The purger process has terminated unexpectedly.
Effect. RDF aborts.
Recovery. Determine why the purger stopped, and then restart RDF. If the problem
persists, contact the Compaq Global Customer Support Center (CGSC) or your service
provider.
867
Cause. The purger process has stopped.
Effect. RDF continues to shut down.
Recovery. This is an informational message; no recovery is required.
Missing RDFNET CONFIG record.
Missing purger config record
Purger process has terminated unexpectedly.
RDF remote purger shutdown complete