RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-61
RDFCOM Messages
Cause. An ALTER command was issued for a non-runtime ALTER option.
Effect. The command fails.
Recovery. Stop updating by entering the STOP UPDATE command through RDFCOM,
and then reenter the ALTER command.
Cause. RDFCOM no longer supports this command.
Effect. The command fails.
Recovery. Select another command.
Cause. The operator issued a TAKEOVER command at the backup node and the
TAKEOVER operation has completed.
Effect. The backup database becomes the database of record.
Recovery. This is an informational message; no recovery is required.
Cause. The COPYAUDIT command could not find audit that should exist in the local
image trail.
Effect. The COPYAUDIT command aborts.
Recovery. There may be no recovery for this problem. To verify that required audit is
missing from your local image trail, consult your local Tandem analyst.
Cause. You tried to have RDF/IMP protect a data volume associated with an auxiliary
audit trail.
Effect. The SET or ADD command fails.
Recovery. RDF/IMPX must be installed do this.
ALTER of this element cannot be performed with updaters
running
ALTER RECEIVER RDFVOLUME is no longer supported
An RDF TAKEOVER has completed
Audit is missing. Consult your Tandem analyst.
Aux audit support is only available with the RDF/IMPX product