RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-63
RDFCOM Messages
node
is the name of the backup node that was unavailable.
Cause. Either the START RDF command failed because the backup node was
unavailable, or the RDF configuration file is invalid.
Effect. The command or requested operation fails.
Recovery. Examine the RDF configuration file, and correct it if necessary. Otherwise,
reenter the START RDF command when the backup node becomes available.
error
is the file-system error number that identifies the specific error.
component
is the name of the RDF component for which the ALTER command failed.
Cause. An ALTER command failed for the specified components.
Effect. The command fails.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the command that encountered the error. Otherwise, see your system manager.
volume
is the name of an RDF data volume.
Cause. You have attempted to delete an updater that protects the specified
PNETTXVOLUME. This is not allowed because it would break your RDF network.
Effect. Delete fails.
Recovery. If you really must delete the updater, you will then need to reconfigure your
network master and possibly your local configuration.
BACKUPSYSTEM \node is Unavailable
Broadcast ALTER Failed: error# on component
Cannot delete NETWORK PNETTXVOLUME volume