RDF/IMP and IMPX System Management Manual (RDF 1.3+)
Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-67
RDFCOM Messages
error#
is the file-system error number that identifies the specific error.
volume-name
is the image trail volume on which the error occurred.
Cause. During execution of a START RDF command or a VALIDATE
CONFIGURATION command, RDFCOM determined that sufficient disk storage for
image files did not exist in each secondary image trail for at least one additional image
file. As one of its validation checks during processing of these commands, RDFCOM
tries to create a temporary image file on the IMAGETRAIL volume. This allocation
failed for the reason indicated by the file-system number error#.
Effect. The command fails.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. Correct the error indicated by
error#. This might necessitate altering the IMAGETRAIL configuration parameter to
specify a new volume for the secondary image trail. Then, reenter the START RDF or
VALIDATE command.
ctrl-subvol
is the name of an RDF subsystem control subvolume.
Cause. The RDF subsystem with the specified control subvolume does not contain a
network record.
Effect. Validation fails.
Recovery. You must add the appropriate NETWORK configuration record.
Cause. You tried to add an auxiliary extractor or receiver to an RDF environment that
had previously been configured for lockstep operations.
Effect. The ADD EXTRACTOR or ADD RECEIVER command fails.
Recovery. You cannot have both lockstep operation and protection for data configured
to an auxiliary audit trail in the same RDF subsystem. If you want lockstep protection,
then your data must be placed on TMF data volumes configured to the Master Audit
Creation error error# on IMAGETRAIL volume-name
ctrl-subvol network record not found
Data from auxiliary audit trails is not allowed with lockstep