RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-69
RDFCOM Messages
error#
is the file-system error number that identifies the specific error.
filename
is the name of an RDF configuration file on the control subvolume.
Cause. While RDF was attempting to check if an RDF control file existed in
$SYSTEM.control-subvolume on the backup system, file-system error error#
was returned.
Effect. The INITILIALIZE RDF command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. Analyze and correct the problem,
and then retry the INITIALIZE RDF command.
error#
is the file-system error number that identifies the specific error.
Cause. The TMP returned the specified file-system error number when attempting to
unpin a TMF audit trail file.
Effect. The UNPINAUDIT command is ignored.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. Take appropriate corrective action,
and then reissue the UNPINAUDIT command.
error#
is the file-system error number that identifies the specific error.
Cause. The COPYAUDIT command encountered the specified error while attempting
to allocate extents for a new image file on the local image trail.
Effect. The COPYAUDIT command aborts.
Encountered error error# when checking filename
Error error# obtained in attempting to unpin audit
Error error# on allocation of extents for imagefile