RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-80
RDFCOM Messages
The correct format for the timestamp is:
day month year hour : min
where:
day
is a number from 1 to 31.
month
is the first three letters of the month, such as JAN, FEB, MAR.
year
is a two-digit or four-digit number, such as 91 or 1991. Any year greater than
1999 must be specified in four digits.
hour
is a number from 0 to 23.
min
is a number from 00 to 59. min must be preceded by a colon (:).
Cause. A NEWPROCESS error occurred during START RDF or TAKEOVER
processing.
Effect. The START RDF or TAKEOVER operation is aborted.
Recovery. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
error#
is the NEWPROCESS error number that identifies the specific error.
Cause. A NEWPROCESS error occurred during START RDF or TAKEOVER
processing.
Effect. The START RDF or TAKEOVER operation is aborted.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting process errors, see the
Guardian Procedure Errors and Messages Manual. Correct the error and reenter the
START RDF or TAKEOVER command.
Library Conflict
Library File Error: error#