RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-86
RDFCOM Messages
error#
is the file-system error number that identifies the specific error.
Cause. The COPYAUDIT command encountered the specified error in attempting to
read the remote image trail files.
Effect. The command fails.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the COPYAUDIT command. Otherwise, see your system manager.
Cause. Your current RDF configuration does not have the NetworkMaster attribute set
and you have tried to add more than one network record.
Effect. The configuration command fails.
Recovery. If the network record you have previously added pertains to the RDF
network master subsystem, then do not add any further network records. If the network
record you have previously added does not pertains to the RDF network master
subsystem, then you need to purge your current configuration., reinitialize, and
reconfigure.
Cause. You issued a command restricted to members of the super-user group, but your
logon ID does not indicate that group.
Effect. The command fails.
Recovery. Select another command, or ask an authorized person in the super-user group
to issue the command for you.
Obtained error error# in attempting to examine remote
imagetrail files
Only one Network record is allowed for a non-network master
Only the SUPER group can execute this command