RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-89
RDFCOM Messages
volume
is the name of an RDF data volume.
ctrl-subvol
is the name of an RDF subsystem control subvolume.
Cause. The specified volume for the RDF subsystem with the specified control
subvolume is not configured to the master audit trail.
Effect. Validation fails.
Recovery. The PNETTXVOLUME must be configured to the master audit trail. You
need to reconfigure your network master and the subsystem with the specified control
subvolume.
volume
is the name of an RDF data volume.
Cause. The specified PNETTXVOLUME is not configured to a MAT based updater.
Effect. Validation fails.
Recovery. You must reconfigure your network master and possibly your local
configuration.
error#
is the file-system error number that identifies the specific error.
Cause. The COPYAUDIT command encountered the specified error while attempting
to position into a local image file on the local image trail.
Effect. The COPYAUDIT command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the COPYAUDIT command. Otherwise, see your system manager.
PNETTXVOLUME volume for ctrl-subvol must be protected by a
MAT based-updater
PNETTXVOLUME volume is not configured to a MAT based updater
Position error error# on local image file