RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-90
RDFCOM Messages
error#
is the file-system error number that identifies the specific error.
filename
is the name of the image trail file associated with the error.
Cause. The COPYAUDIT command encountered the specified error while attempting
to position into the specified image file on the local image trail volume.
Effect. The COPYAUDIT command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the COPYAUDIT command. Otherwise, see your system manager.
error#
is the file-system error number that identifies the specific error.
Cause. The COPYAUDIT command encountered the specified error while attempting
to position into a remote image file on the remote image trail.
Effect. The COPYAUDIT command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the COPYAUDIT command. Otherwise, see your system manager.
primary-system
is an RDF system name.
Cause. The network master network record does not have the specified primary system
name.
Effect. Validation fails.
Recovery. You must reconfigure your network master.
Position error error# on new image file filename
Position error error# on remote image file
Primary node in network master record is incorrect primary-
system