RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-97
RDFCOM Messages
Cause. You have attempted to add the NetSynch process to your configuration, but your
configuration is not the network master.
Effect. The configuration command fails.
Recovery. Do not add this record.
rdf-vol
is the RDFVOLUME specified in the network record of the network master.
Cause. The RDFVOLUME of the current RDF configuration does not match the value
specified in the network record of the network master.
Effect. Validation fails.
Recovery. You must reconfigure your network master and possibly your local
configuration.
Cause. The RDFVOLUME of the current RDF configuration is invalid in the network
record of the network master.
Effect. Validation fails.
Recovery. You must reconfigure your network master and possibly your local
configuration.
Cause. You tried to add an auxiliary receiver for which you had specified an
RDFVOLUME.
Effect. The ADD command fails.
Recovery. Issue a RESET RECEIVER command, and then reconfigure the particular
receiver without specifying an RDFVOLUME.
RDFNETS process only allowed for RDF network master
configuration.
RDFVOLUME in network master record is incorrect rdf-vol.
RDFVOLUME in network master record is invalid.
RDFVOLUME is not allowed for an aux receiver. Auxiliary
receivers do not have an RDFVOLUME.