RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-113
RDFCOM Messages
Cause. Your current RDF subsystem is not listed in your the configuration of your
network master.
Effect. Validation fails.
Recovery. You must reconfigure your network master and possibly your local
configuration.
Cause. There is a problem with TMF.
Effect. The configuration validation fails.
Recovery. Check the status of TMF. When TMF is operational, reenter the command.
Cause. TMF has not been configured.
Effect. The requested RDFCOM operation fails.
Recovery. Configure and start TMF, and request the RDFCOM operation again.
Cause. While either attempting to validate the RDF configuration or to start RDF,
RDFCOM discovered that TMF is not running.
Effect. The command fails.
Recovery. Start TMF. Then validate your configuration and start RDF.
Cause. TMF has not been started.
Effect. The requested RDFCOM operation fails.
Recovery. Check the contents of the RDF configuration file, issue a VALIDATE RDF
command to verify the configuration, and reissue your request for the RDFCOM
operation you originally wanted to perform.
This RDF subsystem is not configured in the network master
subsystem
TMF is having trouble.
TMF is not configured.
TMF is not running.
TMF is not started yet.