RDF/IMP and IMPX System Management Manual (RDF 1.3+)

Messages
Compaq NonStop™ RDF/IMP and IMPX System Management Manual—522204-001
C-124
RDFCOM Messages
error#
is the file-system error number that identifies the specific error.
Cause. You are attempting to execute an RDFCOM STOP SYNCH command, but
RDFCOM encountered the specified error while sending the message to the extractor.
Effect. The STOP SYNCH command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. Correct the problem and reissue
the STOP SYNCH command.
error#
is the file-system error number that identifies the specific error.
Cause. The COPYAUDIT command encountered the specified error while attempting
to write data to a local image file on the local image trail.
Effect. The COPYAUDIT command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the COPYAUDIT command. Otherwise, see your system manager.
error#
is the file-system error number that identifies the specific error.
filename
is the name of the image trail file associated with the error.
Cause. The COPYAUDIT command encountered the specified error while attempting
to write data into the specified image file on the local image trail volume.
Write error error# on attempt to reach the extractor, STOP
SYNCH command aborted.
Write error error# on local image file
Write error error# on new image file filename