RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Operating and Monitoring RDF
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
4-11
Requesting Online Help
Help for Command Syntax
To obtain syntax information for an individual command, enter HELP followed by the
command name. For example, to display the ADD command syntax, enter:
]HELP ADD
RDFCOM displays the following:
{ RDF }
{ MONITOR }
{ EXTRACTOR }
{ RECEIVER }
ADD { IMAGETRAIL $volume }
{ PURGER }
{ RDFNET }
{ NETWORK }
{ VOLUME $volume }
{ $volume }
Cannot be performed with RDF running.
Only a user in the SUPER group can execute this command.
To obtain a list of the available RDFCOM commands, enter:
]HELP ALL
RDFCOM displays the following information:
Help is available for the following:
Configuration Commands:
ADD
ALTER { RDF | MONITOR | EXTRACTOR | RECEIVER | PURGER |
VOLUME | RDFNET }
DELETE
INFO
INITIALIZE
RESET
SHOW
SET { RDF | MONITOR | EXTRACTOR | RECEIVER | PURGER |
VOLUME | NETWORK | RDFNET }
Operational Commands:
COPYAUDIT
START
STATUS
STOP
TAKEOVER
UNPINAUDIT
VALIDATE