RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Entering RDFCOM Commands
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
8-5
Output Displayed
Output Displayed
For the RDFCOM commands that display output at your terminal (for example, the
INFO, SHOW, and STATUS series of commands), the elements that appear are
explained under “Output Displayed.”
Examples
Under the heading “Examples,” each command description presents one or more
examples showing how the command is used. For commands that display information,
sample output also appears. Command entries and other user input appear in bold
type; RDFCOM output appears in regular type.
File Names and Process Identifiers
File names and process identifiers sometimes appear as parameters in RDFCOM
commands.
These names typically identify objects such as disk files, log devices, and processes.
Errors can result from improperly specifying these names in RDFCOM commands. In
almost all commands, these names are governed by the common syntax rules
described in the following paragraphs. Where exceptions to these rules occur, they are
noted in the individual command descriptions.
TAKEOVER O
UNPINAUDIT S
VALIDATE S
EXTRACTOR IMAGETRAIL MONITOR RDF RECEIVER PURGER UPDATE VOLUME RDFNET NETWORK OTHER OBJECTS
Legend
A = All users
S = Super-user group only
O = owner of RDF subsystem
* = Must also have remote
passwords for both nodes
X = Depends on which
commands are in the
file
** = RTDWARNING
*** = SYNCH