RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Entering RDFCOM Commands
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
8-31
Command Overview
The subsystem saves the text in the command file, also embedding the
appropriate SET and ADD commands. Any time you want, you can execute the
text by specifying the command file name in an OBEY command or in the IN option
of the RDFCOM command that begins a session, producing a new RDF
configuration based on the one captured by the INFO command. You can use the
OBEYFORM option with any variation of the INFO command: for example, with
INFO EXTRACTOR, INFO RDF, or INFO *.
IMAGETRAIL
displays the names of all volumes on the backup system that are configured as
secondary image trail volumes.
RDF
displays the current configuration parameter values for the RDF global options.
MONITOR
displays the current configuration parameter values for the monitor process.
EXTRACTOR
displays the current configuration parameter values for the extractor process.
RECEIVER
displays the current configuration parameter values for the receiver process.
RDFNET
displays the current configuration parameter values for the RDFNET process.
NETWORK
displays the current configuration parameter values for an RDF network.
PURGER
displays the current configuration parameter values for the purger process.
VOLUME *
displays the current configuration parameter values for all updater processes.
[VOLUME] $volume
displays the current configuration parameter values for an updater process,
implicitly identifying the updater process by the name of the volume on the primary
system for which this process is responsible.