RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Lockstep Operation
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
14-17
Lockstep Operation Event Messages
24
errnum
is a file-system error number.
filename
is the name of a lockstep file.
Cause. The specified error was returned when the lockstep gateway attempted to lock
the specified file.
Effect. The lockstep gateway stops.
Recovery. SCF automatically restarts the gateway. If the problem persists and the
autorestart count is exhausted, correct the condition that caused the error and then
restart the gateway.
25
procname
is the name of an extractor process.
Cause. Lockstep processing is enabled for the specified RDF extractor.
Effect. Lockstep processing is enabled.
Recovery. This is an informational message; no recovery is required.
26
procname
is the name of an extractor process.
Cause. Lockstep processing is disabled for the specified RDF extractor.
Effect. Lockstep processing is disabled.
Recovery. This is an informational message; no recovery is required.
Error errnum returned when attempting to lock the lockstep
file filename.
Lockstep operations ENABLED for RDF extractor procname.
Lockstep operations DISABLED for RDF extractor procname.