RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-11
RDF Messages
723
filename
is the name of the audit trail file that contained the error.
rba
is the relative byte address where the error occurred in the audit trail file.
Cause. The extractor encountered an irrecoverable error at the designated relative
byte address (rba) in the designated TMF audit trail file. This message indicates an
internal RDF or TMF error.
Effect. This is a catastrophic error; the extractor abends, and RDF stops.
Recovery. Because this message indicates a system error, you should preserve the
indicated audit trail file for further analysis by your service provider.
724
Cause. The purger has determined that all updaters have processed through to the
end of the image trail and the RDF takeover operation has completed.
Effect. Normal purger shutdown processing continues. When the purger stops, the
takeover operation is finished.
Recovery. This is an informational message; no recovery is required.
725
Cause. The purger has determined that at least one updater process terminated
prematurely, without processing through to the end of the image trail. The premature
updater shutdown may have resulted from a double CPU failure or a STOP command
entered manually from TACL. Because the updater might not have processed all
image audit, the RDF TAKEOVER operation cannot be considered complete. Scan the
EMS event log for RDF message 726: this message identifies the updater process
that did not complete TAKEOVER processing.
Effect. Normal purger shutdown processing continues.
Recovery. Restart the takeover operation by issuing an RDFCOM TAKEOVER
command.
Irrecoverable error on audit trail file filename at RBA rba
RDF TAKEOVER has completed successfully
RDF TAKEOVER has not completed